MENGATASI JANGGUAN MODEM ADSL DAN CARA SETTING

Default IP: 192.168.2.1
Default password: smcadmin
Setting Bridge:

* Klik WAN
* Clik ATM PVC
* Klik VCI
* Protocol: 1483 Bridging, VLAN: Default, VPI/VCI: 8/81, Encapsulation: LLC, Qos Class: UBR, PCR/SCR/MBS: 4000/4000/10
* Klik Save Settings
Setting PPPoE:

* Klik WAN
* Clik ATM PVC
* Klik VCI
* Protocol: PPPoE, VPI/VCI: 8/81, Encapsulation: LLC, QoS Class: UBR, PCR/SCR/MBS: 4000/4000/10, IP assigned by ISP: Yes, IP Address: 0.0.0.0, Subnet Mask: 0.0.0.0, Connect Type: Always Connected, Idle Time (Minute): 5, Username: nmrspeedy@telkom.net, Password: (password dari telkom), Confirm Password: , MTU: 1492
* Klik Save Settings

Default IP: 192.168.1.1
Default username: admin
Default password: 1234
Setting Bridge

* Pilih Network
* Pilih WAN
* Mode: Bridge, Encapsulation: RFC 1483, Multiplexing: LLC, VPI: 8, VCI: 81, Apply
* Pilih Maintenance
* Pilih Tools
* Restart
Setting PPPoE

* Pilih Network
* Pilih WAN
* Mode: Routing, Encapsulation: PPPoE, Username: ( nmrspeedy@telkom.net), Password: (password speedy), Service Name: Speedy, Multiplexing: LLC, VPI: 8, VCI: 81, IP Address: Obtain an IP Address Automatically, Connection: Nailed-Up Connnection, Apply
* Klik Maintenance
* Klik Tools
* Restart

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Advanced
* Klik WAN
* Klik New Connection
* Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit
* Save Settings
* Restart Router
Setting PPPoE:

* Pilih Advanced
* Klik WAN
* Klik New Connection
* Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username:nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit
* Save Settings
* Restart Router

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge

* Klik Advanced
* Pilih WAN
* Klik New Connection
* Connection Name: Speedy, Type: Bridge, VPI: 8, VCI: 81, and Submit.
* Save Settings
* Restart


Setting PPPoE/Router:

* Klik Advanced
* Pilih WAN
* Klik New Connection
* Connection Name: Speedy, Type: PPPoE, Sharing: Enable, Encapsulation: LLC, Username:nmrspeedy@telkom.net, Password: (password dari telkom), VPI: 8, VCI: 81, and Submit.
* Save Settings
* Restart

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Setup
* Klik Connection
* Bridge Connection Setup. Name: Speedy; Type: Bridge; Encapsulation: LLC; VPI=8; VCI=81, Apply
* Klik Tools
* Klik System Commands, Save All, Restart

Setting PPPoE/Router:

* Klik Setup
* Klik Connection
* Bridge Connection Setup. Name: Speedy; Type: PPPoE; Username: nmrspeedy@telkom.net; Password: (password dari telkom); VPI=8; VCI=81, Apply
* Klik Tools
* Klik System Commands. Save All, Restart

Default IP: 192.168.1.1
Default username: admin
Default password: admin
Setting Bridge:

* Klik Advanced Setup
* Klik WAN
* Find VPI/VCI: 8/81, Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type Bridging, Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Cheklist Enable Bridge Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot
Setting PPPoE:

* Klik Advanced Setup
* Klik WAN
* Find VPI/VCI: 8/81, Klik Edit
* ATM PVC Configuration, VPI=8; VCI=81, Service Category: UBR Without PCR, Next
* Connection Type PPP over Ethernet (PPPoE), Encapsulation Mode LLC/SNAP-BRIDGING, Next
* Put your PPP Username: nmrspeedy@telkom.net; PPP Password: (password dari telkom); PPPoE Service Name: Speedy, Next
* Cheklist Enable WAN Service, Service Name: Speedy, Next
* WAN Setup - Summary, Save
* Save/Reboot

Cara melakukan setting di komputer untuk akses ke modem Articonet.
Untuk setting di komputer dilakukan sesuai dengan operating system yang dipakai di komputer pelanggan, disini yang dibahas khusus untuk Windows XP.
Lakukan network setting di PC (komputer) sbb:
a. Start � Control Panel � Network Connection
b. arahkan kursor pada Local Area Connection yang aktif, kemudian klik kanan dan pilih properties
c. kemudian pilih menu Internet Protocol (TCP/IP) dan klik 2X, maka akan muncul menu General.
d. Pilih Obtain an IP Address Automatically kemudian pilih Obtain DNS server address automatically, kemudian tekan tombol OK.
Panduan cara setting modem ADSL Speedy koneksi PPPoE.(PPPoE)
Setting modem dilakukan melalui browser dengan mengakses alamat
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" disebelah kanan tabel WAN Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = PPPoE
Encapsulation = LLC, kemudian klik tombol Next
Masukkan username dan password Speedy, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable WAN Service", kemudian klik Next dan klik tombol Save
Setting PPPoE untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Berikut langkah setting modem ADSL Articonet untuk Dial-Up/Bridge.
Setting modem dilakukan melalui browser dengan mengakses alamat 
Masukkan username dan password: admin/admin
Setelah masuk ke menu setting lakukan langkah berikut:
Masuk ke menu "Advanced Setup" kemudian pilih "WAN" dan klik tombol "Edit" Masukkan nilai PVC Configuration: (masukkan nilainya sesuai wilayah TELKOM masing-masing daerah)
VPI = X
VCI = XX
Service Category = UBR Without PCR, kemudian klik tombol Next
Connection type = Bridging
Encapsulation = LLC, kemudian klik tombol Next
Tandai atau kasih v untuk pilihan "Enable Bridge Service", kemudian klik Next dan klik tombol Save
Setting Bridge untuk koneksi Speedy telah selesai dilakukan
Selanjutnya klik tombol Save/Reboot
(Modem akan reboot -/+1 menit dan tunggu sampai modem normal kembali)

Apabila lampu modem masih mati lakukan dengan cara bypass splitter dengan menyatukan antara kabel telepon dengan splitter dengan kupas kepala tinggal sambungkan kabelnya saja kesalahan ada di splitter yang harus diganti.